EHT WATER TANKS

LATEST NEWS UPDATE :

Look out for Pipeco Tanks Malaysia in PLUMBEX - India's Largest Exibition of Water, Sanitation and Plumbing prducts | On April 2024 in Mumbai, INDIA

PRESSED STAINLESS STEEL SECTIONAL WATER TANK

GENERAL SPECIFICATIONS

Tank panels pressed with a combined double flange at an angle of 45 degree and 90 degree to the face of the plate on four sides.

The stays and cleats are made of steel angle bar and steel plate.

Hot Dipped Galvanised steel bolts, nuts and washers for internal and external.

Non toxic PVC foam to be used for all jointing between tank panel flange.  

Standard :
PIPECO pressed stainless steel sectional water tank constructed with hydraulically pressed flanged panels

Materials :
The tank panel, tie rods, stays and cleats are made from Stainless Steel Grade 304/316

Internal ladder shall be made of SS304/316 and aluminium for external ladder, 300mm width

As per Pipeco design

Type1.22m (H)2.44m (H)3.66m (H)4.88m (H)
Tank covers1.5mm1.5mm1.5mm1.5mm
4th side panels   2.5mm
3rd side panels  2.5mm2.5mm
2nd side panels 2.5mm3.0mm3.0mm
1st side panels2.5mm2.5mm4.0mm4.0mm
Bottom panels2.5mm2.5mm4.0mm4.0mm

Standard Thickness for 1.0m x 1.0m Tank Panel

Type1.0m (H)1.5m (H)2.0m (H)2.5m (H)3.0m (H)3.5m (H)4.0m (H)
Tank covers1.5mm1.5mm1.5mm1.5mm1.5mm1.5mm1.5mm
4th side panels       
3rd side panels     2mm(1×1.5m)2mm(1x2m)
2nd side panels   2mm(1×1.5m)2mm(1x2m)2.5mm3.0mm
1st side panels2.0mm2mm(1×1.5m)2mm(1x2m)2.5mm2.5mm3.0mm4.0mm
Bottom panels2.0mm2.0mm2.0mm2.5mm3.0mm4.0mm4.0mm
 

 

 
Scroll to Top